Guide STING Maphack Configuration Guide

Hey!

Thanks for the answer, I didn't add it by myself, it was like this when I opened the conf file I just want to make VK_E as my hotkey for Quick Next Game.

 

Hello,
I'v done a little search here, but nothing found. My question is: Is it possible to make super chest(like the ones in Lower Kurast), to be easy visible on the map with Sting MH 1.13.
Thanks and sorry if this is discussed already.

 

Hi guys

First thx alot for the nice guide. Was rly helpfull to understand some basics i had problems with.

I have a little question about the "show indentifyed items" funktion. How does this should work?
My goal is to set off items i already IDed on automap. So if i run Cows or stuff to not see the highlight on he map anymore after i IDed items.

Is this possible with this funktion or is there an other way to do so?

On top of that, I made some new alternative Blob's for Mobs, items, corps and my favorit one is for bossmobs ;D (automap icons) Where can i post them?

 

First of all it's great guide, I'm updating my cfg with a few new things i've got from it.
Got this issue with the socket filter.
For ex:
Item Colours [Battle Staff] [2,3] [Ethereal, Real]: green: -1 (no issues here)
if i add Item Colours [Battle Staff] [2,3] [Ethereal, Real] [0,4]: green: -1 (where [0,4] is supposed to be the no of sockets mh would filter)
the whole line stops working

am i missing something?

 

i don't rly understand what you ment by that but i tried it anyway and it doesn't work, ty anyway

 

got it, thanks a lot!

 

hi again
I have an other question.
what is wrong with this line:
Item Colours[226][3][Ethereal, Real][0,4,5,6]: -1,0x62 //Phase Blade
If i remove the last part with [0,4,5,6] its showing up on automap if not its not showing ....
Shouldnt this be the way i sort out how many socket the item should have?
I also replaced the Eth, Real with 1,2 but still the same

I have droped an sup blade with 0 sockets and its not showing ON automap ;( plx help

 

in general thx for the fast answer
but i need to tell u that this ; -1,0x62 means default items colour and red on automap (hide is -2)
what is working perfectly. i dont wanna have my eth/ normal socked items looking red on the ground. only show up as red on automap. like i said this is not the problem.
I have problems with the socket part. coz if i remove it the line is working like it should.

so the correct code is s0=1 s1=2 s3=4 s4=5 s5=6 s6=7
This should be added in the guide in frist place then, coz there is the [0.5] in the exaple line, what would not work.
For cta u need s5, so it should be [6] or [0,6] if i understand this system correctly.

 

Thx for the reply Nopik

This is how it works perfectly:
Item Colours[226][3][Ethereal, Real][1,5,6,7]: -1,0x62 //Phase Blade
Default on mousover/alt and red on map. U just need to change the mode with "Switch Item Show Mode:" to 1 and its working like it should.
The point with ur line is that not etheral (real) items will be grey as well now ... what i dont wish. Thats why i like to use the default settings.
The Key is the switching of the item show mode. Like this u can use the different colour on map without changing the item colour it self.

 

Next topic are missiles:

Automap Missiles Toggle: 1, VK_NEXT
Hostile Missile Colour: 0x62
Guided Missile Colour: 0x0a
Tracer Missile Colour: 0x97
Other Missile Colour: 0x84
Missile Colours[All Arrows]: 0x20
Missile Colours[BoneSpirit]: 0x20
Missile Colours[BoneSpear]: 0x20
Missile Colours[Teeth]: 0x20
Missile Colours[FrozenOrb]: 0x9e
Missile Colours[Fireball]: 0xa8
Missile Colours[Meteor]: 0xa8

Like this its not showing Hostile Missiles and only 1 flying pixel when using FrozenOrb.

When i add a line that has a mistake in it like this:
Missile Colours[Fire]: 0xa8

the feature starts to work ...but everything is in one colour. Hostile missiles, orb, fireball everything is showen perfectly but in the same colour.
On top of that Battleshouts are showen flying particles of the sorc armors even impacts of fireballs. Thats good but why i cant see them if i remove the line with the mistake.

Its like the wrong line is letting the feature work correctly but ignoring all settings. Its just showing everything and how it should be but not with the correct setting.

Does somebody have an idea how to overcome this and make the feature work properly with the settings i wish.

 

How can I reduce or remove the echo when creating a game

pic

reserve

​

 

I am getting the "command unused, check it" message with this comand:

Save Item List Key: VK_J

I believe the sintaxis is wrong here but I couldn't find anywhere how to configure this line, I hope you guys can help me

 

How do i hide a specific set amulet? if i do: Item Colours [2013 or Amulet] [Set]: Green, 0x84 it'll hide all set amulets...